Back to productAlkali Resistance Fiberglass 

AR Fiberglass Roving used for spray up or mechanical continuous forming GRC.  Soaked in 100 °C; saturated Ca (OH)2 insulation for 4 hours, remained filament strength > 82%, diameter diminution <0.5% (tested in naked fiber without size and coating)  Soaked in 100°C, 10% NaOH insulation for 1 hours, weight loss <0.5%. 
Package:

In standard exporting packing, inside packed with paper cartons Outside packed with wooden pallet one 20'ft can load 17 - 20 metric tons ( 20 pallets)
 
Style   Glass  Density
 (g/cm2)
Filament Dia (µ m) 
Yarn Density
(g/km)
Breaking Strength N/Tex
Size Content % 
Water Content % 
Stiffness 
(mm)
ARCK-2400 
2.78 
14 ± 1.7
2400 
0.5
1.5 - 2.2 
< 0.1 
> 120 

AR Fiberglass Chopped Strand

It's used for premixed GRC, cut with the length of 3mm, 6mm, 12mm, 24mm and divided into two type:  

Type one pre-mix strand: it mixed 20 minutes in cement at 50 RPM still keep good bundle state, will not dispersed to filaments.  
Type two water-dispersible strand: it will disperse to filament in water in 10 seconds.

Packing method:

Net weight: 10 kgs/bag 2 bags/carton, 12 cartons/pallet, one 20'ft can load 9.6 metric tons. 



AR Fiberglass Scrim

Used for lay out, coating or mechanical formed GRC, especially for external wall insulation on site. Properties is same as roving, price depend on coating type and content. 
The product can be manufactured according to customer's special requirement.

Specification

Style 

Density
(mm) 

Width
(mm) 
Tex 
Weight
g/m2
Weight after Coated
g/m2 
Weave 
Warp 
Weft 
ARN4 x 4A
6 x 6
900/1000
(48 x 3) x 2
48 x 3 x 2
93 ± 9
101
leno
ARN4 x 4B
6 x 6
900/1000
(48 x 6) x 2
48 x 3 x 2
169 ± 17
184
leno
ARN4 x 4B
6 x 6
900/1000
(48 x 9) x 2
48 x 3 x 2
261 ± 26
284
leno
ARN4 x 4C
6 x 6
900/1000
(48 x 5) x 2
48 x 3 x 2
138 ± 14
150
leno
ARN4 x 8
6 x 3
900/1000
(48 x 2) x 2
48 x 3 x 2
216 ± 22
234
leno
ARN2.5 x2.5
10 x 10
900/1000
(48 x 6) x 2
48 x 3 x 2
118 ± 12
128
leno

 

(C)Copyright by fiberglassking.com,all rights reserved.
Address: Room No.3 3 Floor Jifa Building,No.68, Jianxinbei
Road, Jiangbei District, Chongqing, China
Tel: 0086-23-67735308 67605422 Fax: 0086-23-67745017 67917467
E-mail: byglas@email.cta.cq.cn